Corner Guard

Rubber Corner Guards:

Rubber Corner Guards are designed to protect the edges of columns in structures, corners and entrances by providing superior impact protection to both vehicles and buildings. These are extruded profiles manufactured from high impact resistant rubber. ELJI’s rubber corner guards are weather resistant, abrasion resistant, crack resistant and do not stain the vehicle. Standard color available is Black. Other colors also available on request.

Three Types of Corner Guards Available with Us are:

• Corner guards with metal backup retainers
• Glue type corner guards-Direct Bolt/Glue
• U type for I beam structures

Materials:

High Impact Resistance SBR+NR, EPDM & Neoprene and Vinyl

Installation Procedure

• Accessories required: GI -Csk 2” Screw + S8 Plastic Fischer – 4 Sets/m

• First, check the bolt length and size.

• Check the fixing surface; it should be flat and perfect.

• Clean the surface before clamping.

• Keep 150mm Distance Gap in the Bottom Side

• Mark the 4 holes positions as per the drawing pitch distance as per Gi retainer and make a 9 mm
dia hole in the fixing surface.

• Insert the Fischer inside the drilled holes in the straight position

• Keep the GI Back up in the fixing surface and clamp it with the 4 screws.

• Insert the Rubber Corner Guard from sideways from one End of the side

• Insert the yellow strips on both sides of the corner guard

Dimension:

Size
50mm
X
50mm
50mm
X
50mm
65mm
X
65mm
75mm
X
75mm
90mm
X
90mm
100mm
X
100mm
120mm
X
120mm
Length
1.00 m and 1.20 m
Length can be customized as required by the customer.

Method of Statement

Product Name : Rubber Corner Guard – Plain
Wing Size 65×65, 75×75, 90×90, 100×100, 120×120 mm

rubber corner guard

corner guard dubai

Installation Procedure

 Accessories required: GI -Csk 2” Screw + S8 Plastic Fischer – 4 Sets/m

• First, check the bolt length and size.

• Check the fixing surface; it should be flat and perfect.

• Clean the surface before clamping.

• Keep 150mm Distance Gap in the Bottom Side

• Mark the 4 holes positions as per the drawing pitch distance as per Gi retainer and make a 9 mm
dia hole in the fixing surface.

• Insert the Fischer inside the drilled holes in the straight position

• Keep the GI Back up in the fixing surface and clamp it with the 4 screws.

• Insert the Rubber Corner Guard from sideways from one End of the side

cornerguard

Leave a Reply

Your email address will not be published. Required fields are marked *